7 If applicable, replace the manual raid key.
Notice: A notice indicates manual either potential damage to hardware or loss of dell data and manual tells you how to avoid the problem.
Dell PowerEdge 2850 Desktop, Laptop Manual.
A Raise the riser board cam lever to a vertical position.
6 Remove the expansion cards.Align the connector on the underside of the riser.2 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.3 Slide the system board towards the back of the chassis until the retention pin engages.Related and Similar Manuals for Dell PowerEdge 2850.C Lift the front-fan tray from its three securing posts.See "System Memory" in "Installing System Options" user in your Installation and Troubleshooting Guide.Advertising advertising, thank you for your participation!Your upgrade kit includes a new system board and riser board.10 If applicable, remove poweredge the RAC card.2 Carefully lower the system board into the chassis until the tabs poweredge on the chassis fit through the corresponding slots in the system board.18 To remove the system board: a Lift up the blue retention pin and slide the system board towards the front of the system to disengage the.
6 If applicable, replace the RAC card.
Caution: A caution indicates a potential for linksys property damage, personal injury, or death.
9 Install the new riser board provided in your membership upgrade kit.
B Lower the riser board into position The cam lever fits through the opening near the outer edge of the riser board.